Protecting and restoring asphalt surfaces across San Jose with durable, high-performance slurry coating applications.
Get Your Free EstimateSlurry Coating is a cold-mix asphalt treatment. This treatment involves putting a thin, protective layer onto existing asphalt pavement. This layer is made of emulsified asphalt, aggregate, water, and chemical additives. The aggregate is usually sand or crushed slag. Slurry Coating is different from sealcoating because it uses fine aggregates. These aggregates make the surface more durable and skid-resistant. They also fill small surface imperfections. This helps the pavement last longer, often for several years.
Our approach to Slurry Coating in San Jose starts with a thorough cleaning of the pavement. We remove all debris, oil spots, and loose material from the pavement. We then fix any cracks or large potholes. A stable surface is important for the slurry to stick correctly and work as it should. The Slurry Coating mix design is carefully set. This is done based on the pavement's condition and how much traffic it will see. This makes sure the aggregate size and emulsion content are right for the best stickiness and wear resistance.
For San Jose properties, Slurry Coating is very good at fighting the sun's damage and the temperature changes that can cause surface cracks. The protective Slurry Coating layer keeps the asphalt underneath safe from UV rays and water getting in. These are the main things that cause pavement to wear out in the San Jose climate. This kind of maintenance stops more expensive repairs later on. This means property owners in San Jose get better value over time.
Property owners in San Jose often ask about how long the Slurry Coating takes to dry and how it affects traffic. A normal Slurry Coating job in San Jose needs 24 to 48 hours before cars can drive on it. This time depends on the temperature and how humid it is. People can usually walk on it sooner. Charis Paving Co schedules projects to cause the least trouble. We give clear timelines and work plans before we start the Slurry Coating work. This is because proper curing is important for the coating to last a long time and perform well. Charis Paving Co provides Slurry Coating services for homes and businesses in San Jose.
San Jose's weather, with its long, dry summers and sometimes heavy winter rains, puts a lot of stress on asphalt pavements. The strong sun in San Jose causes the asphalt binder to break down and get brittle. This leads to the surface unraveling and small cracks showing up. If there is no protective layer, these small cracks will get bigger fast. This lets water get down into the sub-base layer of the pavement.
Water getting into the pavement is a big problem for any pavement, especially in areas of Santa Clara County where the soil might have expansive clays. When water gets into these base layers, it makes the pavement weaker. This can cause potholes and alligator cracking in the asphalt. Slurry Coating puts a waterproof barrier over the asphalt. This stops the water from getting in and helps keep the foundational strength of your San Jose pavement.
Slurry Coating also makes old asphalt look new again. It gives a smooth, dark black finish that makes the property look better. Slurry Coating also helps with skid resistance. This is a safety benefit for cars and people walking on the pavement. This preventative measure is a good way to make your asphalt last longer. It delays the need for a full resurfacing or reconstruction of your San Jose asphalt. Charis Paving Co provides Slurry Coating services for homes and businesses in San Jose.
First, we thoroughly clean the asphalt surface in San Jose. All dirt, oil, and loose debris are removed from the asphalt surface. Any existing cracks in the San Jose asphalt are sealed with hot-applied crack filler. Minor potholes are also patched to make sure there is a stable and uniform base for the slurry application.
Our technicians at Charis Paving Co formulate the Slurry Coating mix. We use high-quality emulsified asphalt, carefully graded aggregates, clean water, and specialized additives in San Jose. The exact proportions for the Slurry Coating are calibrated based on the pavement's condition and the expected traffic in San Jose. This makes sure the Slurry Coating performs well and is very durable. For homes and businesses in San Jose, Charis Paving Co provides Slurry Coating services.
The Slurry Coating mixture is put down evenly across the pavement. We use specialized equipment for this, usually a truck-mounted spreader box. This makes sure the Slurry Coating has a consistent thickness and good, uniform coverage. This consistent thickness and uniform coverage is important for a smooth finish and for the Slurry Coating to cure correctly here in San Jose.
After the Slurry Coating is applied, it needs time to cure and harden. Charis Paving Co sets up clear traffic control measures in San Jose. We barricade the area for 24 to 48 hours. This allows the Slurry Coating to fully set. It is important that the Slurry Coating cures completely before cars drive on it. This prevents damage to the new Slurry Coating and makes sure it lasts a long time.
Charis Paving Co offers Slurry Coating services across San Jose, CA, and the communities right next to it. We know the specific needs of local pavements. This includes streets in Willow Glen and commercial properties near the San Jose International Airport.
Our Slurry Coating service also covers Santa Clara, Campbell, and Cupertino, as well as other areas within the Santa Clara Valley. We are familiar with the soil types in San Jose, including the loamy soils in Willow Glen and the sandy soils in Alviso. We also understand the traffic patterns that affect pavement performance in San Jose. This local knowledge helps us deliver strong, effective Slurry Coating solutions for every project in San Jose.
Tell us what you need and someone will get back to you quickly. No pressure, no commitment.